Risk Engineering Consultants

■

IS: 456 - Code of practice for plain and reinforced concrete

■

IS: 383 - Specifications for fine and coarse aggregate from natural sources for concrete.

■

IS: 2386 - Methods of tests for aggregate for concrete. (nine parts)

■

IS: 2430 - Methods of sampling.

■

IS: 4082 - Specifications for storage of materials.

■

IS: 2116 - Permissible clay, silt and fine dust contents in sand.

■

IS: 2250 - Compressive strength test for cement mortar cubes.

■

IS: 269-2015 - Specifications for 33, 43 and 53 grade OPC.

■

IS: 455 - Specifications for PSC (Portland slag cement)

■

IS: 1489 - Specifications for PPC (Portland pozzolana cement).

■

IS: 6909 - Specifications for SSC (super-sulphated cement).

■

IS: 8041 - Specifications for RHPC (Rapid Hardening Portland cement)

■

IS: 12330 - Specifications for SRPC (sulphate resistant portland cement).

■

IS: 6452 - Specifications for HAC for structural use (high alumina cement).

■

IS: 3466 - Specifications for masonry cement.

■

IS: 4031 - Chemical analysis and tests on cement.

■

IS: 456; 10262; SP 23 - Codes for designing concrete mixes.

■

IS: 1199 - Methods of sampling and analysis of concrete.

■

IS: 516BXB JWJJS - Methods of test for strength of concrete.

■

IS: 13311 - Ultrasonic testing of concrete structures.

■

IS: 4925 - Specifications for concrete batching plant.

■

IS: 3025 - Tests on water samples

■

IS: 4990 - Specifications for plywood formwork for concrete.

■

IS: 9103 - Specifications for concrete admixtures.

■

IS: 12200 - Specifications for PVC (Polyvinyl Chloride) water bars.

■

IS: 1077 - Specifications for bricks for masonry work.

■

IS: 5454 - Methods of sampling of bricks for tests.

■

IS: 3495 - Methods of testing of bricks.

■

IS: 1786 - Cold-worked HYSD steel rebars (grades Fe415 and Fe500).

■

IS: 432; 226; 2062 - Mild steel of grade I.

■

IS: 432; 1877 - Mild steel of grade II.

■

IS: 1566 - Specifications for hard drawn steel wire fabric for reinforcing concrete.

■

IS: 1785 - Specifications for plain hard drawn steel wire fabric for prestressed concrete.

■

IS: 2090 - Specifications for high tensile strength steel bar for prestressed concrete.

■

IS: 2062 - Specifications for steel for general purposes

■

IS: 226 - Specifications for rolled steel made from structural steel.

■

IS: 2074 - Specifications for prime coat for structural steel.

■

IS: 2932 - Specifications for synthetic enamel paint for structural steel.

■

IS: 12118 - Specifications for Polysulphide sealants

Pressure Vessels, as per ASME Sec VIII Div 1 and ASME Sec VIII Div 2
Piping and Piping skids designed from small bore 2” and smaller to 24” size abide to;

■

ASME B 31.1 - Power Piping

■

ASME B31.3 - Process Piping

■

ASME B 31.4/11 - Liquid and slurry transportation piping systems

■

ASME B31.5 - Refrigeration piping

■

ASME B 31.8 - Gas transmission and distribution piping system

■

ASME B31.9 - Building Services Piping (industrial, institutional, commercial, and public buildings, and in multi-unit residences.)

■

B31.12 - Hydrogen Piping

■

IBR - Piping & Equipment (Steam Pressure 3.5 Kg/Cm^2 g & above) Steam and
Condensate

■

IS 2379 - Utility piping for domestic and public buildings

■

NFPA 54/ANSI Z223.1 - National Fuel Gas Code: piping for fuel gas

■

NFPA 99 - Health Care Facilities

■

NFPA 85 - Boiler and Combustion Systems Hazards; fuel (pulverized coal, gas or oil) transport piping Building and plumbing codes

The welding processes and procedure qualifications have been developed for variety of different grades of materials like Carbon Steel, Stainless Steel, Copper / Copper alloy brazing and Monel to ASME Section IX, IBR qualified, In-house Level II, NDT Weld Inspection capabilities.

■

IS:732 - 1989 Code of practice for electrical wiring installations.

■

IS: 4648 - 1968 - Guide for electrical layout in residential buildings.

■

IS:8061 - 1976 - Code of practice for design, installation and maintenance of service lines up to and including 650V

■

IS: 8884 - 1978 - Code of practice for installation of electric bells and call system.

■

IS: 5578 - 1985 - Guide for marking of insulated conductor.

■

IS: 11353- 1985 - Guide for uniform system of marking and identification of conductors and apparatus terminals.

■

IS: 5728 - 1970 - Guide for short-circuit calculations

■

IS: 7752(Part-1)-1975 - Guide for improvement of power factor in consumer installation: Low and medium supply voltages.

■

IS: 3646(Part-1) -1966 - Code of practice for interior illumination: Principles for good lighting and aspects of design.

■

IS: 3646(Part-2)-1966 - Code of practice for interior illumination: Schedule of illumination and glare index.

■

IS: 2672 - 1966 - Code of practice for library lighting.

■

IS:10118(Part-1)-1982 - Code of practice for selection, installation and maintenance of switchgear and control gear: General.

■

IS: 10118(Part-2) -1982 - Code of practice for selection, installation and maintenance of switchgear and control gear.

■

IS: 10118(Part-3)-1982 - Code of practice for selection, installation and maintenance of switchgear and control gear: Installation.

■

IS: 10118(Part-4)-1982 - Code of practice for selection, installation and maintenance of switchgear and control gear: Maintenance.